Cable Bend Size II
The 15° “Cable Bend” elbow piece, suitable for the “Cable Duct” system, allows the cable duct section to be deflected in 15-degree increments and can be used independently of the installation direction. This is achieved by connecting the pieces using intermediate connectors, which allow them to be used on both sides.
Technical Data Cable Bend 15°, Size II
- Length: 241 mm
- Width (inside / outside): 250 mm/351 mm
- Height (inside / outside): 155 mm/215 mm
- Weight: 1.94 kg/m
- Material: PP Copolymer (UV-stabil)
- Fire protection class: K1 according to DIN 53438 part 2
- Dimensional stability: -30°C to +80°C
- Load capacity class: A15 according to DIN EN 124-1/ DIN EN 1433
- Electrical properties:
specific surface resistance approx. 1015 Ω x cm,
Dielectric strength Ed approx. 0.6 / 0.8 at 100 kV / mm according to DIN VDE 303-ICE 243 - Application: enables flexible changes of direction in the cable duct route for left and right turns 15°, 30°, 45°, 60°, 75° or 90°
Cable Cube, Size II
The Cable Cube, compatible with the Cable Duct Size II cable channel, enables flexible cable routing with single or double-sided outlets. The Wirthwein Cable Cube is perfect when multiple outlets or a branch in the trough section is required on site. The design is reminiscent of a cross and is multifunctional: connecting two cubes allows for a transition to a parallel strand. Even 90° angles can be implemented without any problems.
Technical Data Cable Cube II
- Length: 470 mm
- Width (inside / outside): 250 mm/380 mm
- Height (inside / outside): 158 mm/216 mm
- Weight: 6.5 kg/m
- Material: PP (flame resistant, 3D print optimized))
- Fire protection class: K1 according to DIN 53438 part 2
- Dimensional stability: -30°C to + 80°C
- Load capacity class: A15 according to DIN EN 124-1/ DIN EN 1433
- Application: enables flexible outlets for additional cable routing on one or both sides;
- Transition to a parallel cable duct line by connecting two cubes, 90° angle possible
Galerie
Your project with Wirthwein
Get in touch with our Railway team.
You have an inquiry, require technical advice or would like us to call you back? Then please make use of our contact form, write us an e-mail or just call us.
Phone
+49 7933 702 0
E-mail
railway@wirthwein.de